Hi-Def Component Video Switching

Vaux Lattis switchers for HDTV Component Video are available in either standard (75-ohm phono-jack output) or CAT-5 versions. Vaux CAT-5 switchers use 8-position modular output jacks, for connection using standard CAT-5 patch cables and in-wall wiring. Our CAT-5 component switchers are also available with or without Digital Audio capability. Available in the same 6x8, 12x8, and 12x16 switching sizes, our standard component switchers have an LE- prefix, while our CAT-5 versions are denoted with a CT- prefix.

Lattis component video switchers provide high-def switching of video sources such as DVD, TIVO, satellite, cable, game consoles, or any device with a component video output. These switchers handle Hi-Def 1080p, 1080i, and 720p formats, as well as Progressive-Scan 480p signals, and Std-Def 480i. Note that the resolution of component video is dependent on the source signal, and that the HDTV monitor adapts to the resolution of the source.

Lattis Hi-Definition Component Video Switchers:

• High-Definition Component Video, for 1080p, 1080i, 720p, 480p, and 480i switching applications
• 6x8, 12x8, and 12x16 Source-by-Zone sizes
• Zone outputs can run up to 500-feet on CAT-5 cable, or 250-feet on coaxial cable
• Wide-Bandwidth (1080p-capable)


• Control via RS-232, Ethernet, and/or Infrared (IR)
• Daisy-chain any of our switchers together for up to 255 zones of audio/video
• Breakaway routing commands for audio-only, video-only, or audio/video
• RS-232/Ethernet/IR control daisy-chains using modular cords -- control multiple switchers from a single port
• Powered by 12VDC

Lattis Hi-Def Component-Video units may be combined with any of our other switchers for various signal routing needs. When combined with our stereo audio switchers, RS-232/Ethernet control provides commands for switching audio/video sources together, or breakaway control for audio-only or video-only switching. In addition to RS-232 or Ethernet ascii commands, all Lattis switchers may be controlled using infrared commands from a Vaux remote control or IR-learning remote or keypad.

Standard Component Video Models (LE-xxxHD)

Lattis LE-608HD, LE-1208HD, and LE-1216HD systems switch Hi-Definition Component Video signals, to eight or sixteen HDTV monitors up to 250 feet away, using triple-coax cabling.

The Lattis LE-808AHD switcher combines a 6x8 Hi-Definition Component Video section with an 8x8 stereo audio section; the A/V sections may be controlled together or independently.

Lattis LE-608HD 6-source by 8-zone (6x8) Hi-Def Component Video Switcher
(1U rack chassis)

Lattis LE-1208HD 12-source by 8-zone (12x8) Hi-Def Component Video Switcher
(2U rack chassis)

Lattis LE-1216HD 12-source by 16-zone (12x16) Hi-Def Component Video Switcher
(2U rack chassis)

Lattis LE-808AHD 6x8 Component Video and 8x8 Stereo Audio Switcher
(2U rack chassis)

CAT-5 Component Video Models (CT-xxxHD)

Lattis CT-608HD, CT-1208HD, and CT-1216HD systems switch Hi-Definition Component Video signals, to eight or sixteen HDTV monitors up to 500 feet away, using CAT-5 cabling. These switchers (note the HD suffix) provide the component signal and room receiver power on a single CAT-5 cable to the distant monitor. Use model CT-HDRX receiver modules with these switchers.

Lattis model CT-808AHD switchers combine a 6x8 CAT-5 Component Video section with an 8x8 stereo audio section. The A/V sections may be controlled together or independently.

CT-HDRX Hi-Def CAT-5 Component Video Room Receiver
(for use with CT-xxxHD switchers -- powered by switcher)

Lattis CT-608HD 6-source by 8-zone (6x8) Hi-Def CAT-5 Component Video Switcher
(1U rack chassis)

Lattis CT-1208HD 12-source by 8-zone (12x8) Hi-Def CAT-5 Component Video Switcher
(2U rack chassis)

Lattis CT-1216HD 12-source by 16-zone (12x16) Hi-Def CAT-5 Component Video Switcher
(2U rack chassis)

Lattis CT-808AHD 6x8 CAT-5 Component Video and 8x8 Stereo Audio Switcher
(2U rack chassis)

CAT-5 Component Video and Digital Audio Models (CT-xxxHX)

Vaux models denoted with an HX suffix switch Digital Audio along with Component Video. Lattis CT-608HX, CT-1208HX, and CT-1216HX switchers have a fourth channel for Digital Audio (or even composite video) use. The Component Video and Digital Audio channels can switch together or independently. Maximum CAT-5 distance is 500 feet, using a single CAT-5 cable. Model CT-HXRX receiver modules used with these switcher models are powered by a small local power adapter.

The Lattis CT-808AHX switcher combines a 6x8 CAT-5 Component Video (and Digital Audio) section with an 8x8 stereo audio section. The A/V sections may be controlled together or independently.

CT-HXRX Hi-Def CAT-5 Component Video and Digital Audio Room Receiver
(for use with CT-xxxHX switchers -- powered by local 12VDC supply)

Lattis CT-608HX 6-source by 8-zone (6x8) Hi-Def CAT-5 Component Video Switcher
(1U rack chassis)

Lattis CT-1208HX 12-source by 8-zone (12x8) Hi-Def CAT-5 Component Video Switcher
(2U rack chassis)

Lattis CT-1216HX 12-source by 16-zone (12x16) Hi-Def CAT-5 Component Video Switcher
(2U rack chassis)

Lattis CT-808AHX 6x8 CAT-5 Component Video and 8x8 Stereo Audio Switcher
(2U rack chassis)

© 2011 vaux electronics, inc.